HIKVISION DS-A81024S/192 User Manual

Storage System User Manual
29
2. Enter New Capacity (MB).
3. Select Available Physical Volume to extend.
4. Click OK.
3.5 Configuration
Purpose:
You can set the array synchronization speed type and flickering time of positioning indicator in Storage >
Configuration.
Configurations
3.5.1 Configure Synchronization Speed and Type
Purpose:
Array synchronization speed and synchronization type is editable.
Steps:
1. Click Modify of Array Synchronization Speed.
2. Select Array Synchronization Speed as High, Medium, Low, or None.
The faster the speed is, the higher the internel IO percentage would be.
3. Click OK.
4. Click Modify of Array Synchronization Type.
5. Select Array Synchronization Type as Serial or Parallel.
6. Click OK.
3.5.2 Configure Flickering Time
Purpose:
When positioning an HDD, the HDD bottom indicator keeps flickering for the set time.
Steps:
1. Enter a number as flickering time in HDD Positioning Flickering Time (s).
Valid flickering time ranges from 5 to 300, and the unit is second.
2. Click Modify.

HIKVISION DS-A81024S/192 Specifications

General

Brand	HIKVISION
Model	DS-A81024S/192
Category	Storage
Language	English