Storage System User Manual
46
Login user, and Password.
5. Optionally, you can enable stream media server by checking Enable SMS (Stream Media System), inputting IP
address: port (e.g., 192.168.0.2:554) in SMS, and select URL Mark and Transmission Method.
6. Optionally, you can enable other function according to your needs.
Enable streaming according to needs: The storage system releases occupied bandwidth, when no
stream requirement for the encoding device. If selected, the encoding device Attribute marks as P.
ANR (Automatic Network Replenishment): When the storage system disconnects with the encoding
device, the encoding device records video and stores in its own storage device, like SD card. Once
connection recovers, encoding device sends the video to the storage system. If selected, the encoding
device Attribute marks as T.
Enable sub-stream to preview and record: If selected, when you preview and record via sub-stream, it
takes lower bandwidth. But sub-stream video quality and bitrate is lower than main stream. And the
encoding device Attribute would mark as S. If record strategy exists, CVR gets stream according to
strategy.
Enable Arming: If selected, when alarm occurs to encoding device, CVR can trigger alarm record. And
the encoding device Attribute would mark as A.
7. Select related record volume in Link to Record Volume.
8. Click OK to add the encoding device.
Add Encoding Device
Repeat above steps to add more encoding devices. Up to 1024 encoding devices can be added.
If the encoding device you add isn’t in the List of Compatible of Encoding Device, the Attribute would mark
as B. You can ask technical support for the List of Compatible of Encoding Device.
To Next Page
Loading...
Need help?
General
