Storage System User Manual
53
Select Encoding Devices
6. Set Video Start time and Video End time of the video you want to upload.
Add Uploading Tasks
7. Click OK to add the task. If encoding device contains the video, it starts uploading the video to Hybrid SAN.
6.5.2.3 Add Upload Plan
Purpose:
Uploading schedule can judge whether video loss happens during record schedule. Configure the uploading
schedule to upload the videos saved in encoding devices back to Hybrid SAN.
Before you start:
Ensure pulling back data from encoding device in schedule options is selected when configuring basic or advanced
schedule. For detailed steps, refer to chapter 6.5.1.2 Simple Record Plan and chapter 6.5.1.3 Advanced .
Steps:
1. Go to Strategy and Alarm > Upload Strategy.
2. Click Add Upload Plan.
3. Enter the encoding device name.
4. Click OK to select the encoding device.
5. Repeat the step to add more. Or select encoding devices or groups in the list.
To Next Page
Loading...
Need help?
General
