Access Control Terminal·User Manual
18
Figure 5-4 Device List
4. Check the device status from the device list, and select an inactive device.
5. Click the Activate button to pop up the Activation interface.
Figure 5-5 List Selecting Interface
6. Create a password and input the password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing
(using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters)
in order to increase the security of your product. And we recommend you reset your password regularly, especially in
the high security system, resetting the password monthly or weekly can better protect your product.
7. Click OK button to start activation.
8. Click the button to pop up the Network Parameter Modification interface.
9. Change the device IP address to the same subnet with your computer by either modifying the IP address manually or checking
the checkbox of Enable DHCP.
10. Input the password to activate your IP address modification.
To Next Page
Loading...
Need help?
General
