Access Control Terminal·User Manual
89
7.5 System Maintenance
7.5.1 Log Management
Interface Introduction
Purpose:
The log files of the Access Control System and the devices that connected to the Access Control System can be searched for
checking.
Click the icon on the control panel to open the Log Search page.
Configuration Logs Searching
Purpose:
The Configuration Log files of the Access Control System can be searched by time, including One-Card Configuration, Access Control
Configuration, Downloading Permission and System Configuration.
Steps:
1. Open the Log Search page.
2. Select the radio button of Configuration Logs.
3. Select the Operation Type of log files.
4. Click the icon to specify the start time and end time.
5. Click Search. The matched log files will display on the list.
You can check the operation time, log type and other information of the logs.
Note: Please narrow the search condition if there are too many log files.
Control Logs Searching
Purpose:
The Control Log files of the Access Control System can be searched by time, including Access Control and Log Search.
Steps:
1. Open the Log Search page.
2. Select the radio button of Control Logs.
3. Select the Operation Type of log files.
4. Click the icon to specify the start time and end time.
5. Click Search. The matched log files will display on the list.
You can check the operation time, log type and other information of the logs.
Note: Please narrow the search condition if there are too many log files.
Searching Configuration Log
Searching One-card Configuration Logs
Purpose:
To Next Page
Loading...
Need help?
General
