Access Control Terminal·User Manual
20
Figure 6-3 Password Authentication Interface
3. Enter the default configuration password.
Tap the # key to confirm the settings. If the configuration password authentication failed, the system will return to the initial
interface, and if the configuration password is successfully authenticated, the system will enter the menu operation interface
Figure 6-4 Menu Operation Interface
On the menu operation interface, you can manage users, set communication parameters, set system parameters, and so on.
6.1 User Management
Purpose:
On the user management interface, you can add and manage users.
Steps:
1. Move the cursor to User (user management) with the direction keys.
2. Tap the # key to enter the user management interface.
Figure 6-5 User Management Interface
6.1.2 Adding User
Purpose:
In the Adding User menu, you can add users, register card, and record fingerprints optionally for the corresponding person.
Steps:
1. Move the cursor to Add (add user) by using the direction keys.
2. Tap the # key to enter the card registration interface.