HIKVISION DS-K1T105 Series - Page 26

Access Control Terminal·User Manual
22
Searching User
Steps:
1. Move the cursor to a user by using direction keys.
2. Tap the # key to pop up an interface for selecting corresponding operations.
Figure 6-9 Managing User Interface
3. Move the cursor to Search User.
4. Tap the # key to enter the searching interface.
Figure 6-10 Searching Interface
5. Enter the card number into Please enter card No. textbox.
6. Tap the # key to view the basic information about the card holder.
Editing User
Steps:
1. Move the cursor to a user by using direction keys.
2. Click the # key to popup an interface for selecting corresponding operations. (Figure 6-9)
3. Move the cursor to Editing User.
4. Tap the # key to enter the editing interface.
Figure 6-11 Editing Interface
5. Edit the user information.
 Adding the Fingerprint