HIKVISION DS-K1T105 Series User Manual

Access Control Terminal·User Manual
38
Network Settings
Purpose:
In the network settings interface, the network settings of the device can be uploaded and reported.
Uploading Mode Settings
Steps:
1. In the access controller editing interface, click Network Settings button to enter the network settings interface.
2. Click the Uploading Mode Settings button.
3. Select the center group in the dropdown list.
4. Tick the Enable to enable the selected center group.
5. Select the report type in the dropdown list.
6. Select the uploading mode in the dropdown list. You can enable N1/G1 for the main channel and the backup channel, or select
off to disable the main channel or the backup channel.
Note:
The main channel and the backup channel cannot enable N1 or G1 at the same time.
7. Click the OK button to save parameters.
Network Center Settings

HIKVISION DS-K1T105 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T105 Series
Category	IP Access Controllers
Language	English