Access Control Terminal·User Manual
43
Department Management
Steps:
1. In the department list, click button to pop up the adding department interface.
Notes:
Multi-level department system can be created. Click a department as the upper-level department and click
button, and then the added department will be the sub-department of it.
Up to 10 levels can be created.
2. You can double-click an added department to edit its name.
3. You can click to select a department, and click the button to delete it.
Notes:
The lower-level departments will be deleted as well if you delete a department.
Make sure there is no person added under the department, or the department cannot be deleted.
Person Management
Purpose:
In the person management interface, you can add, delete, edit and import the person information.
Adding Person
Steps:
1. Select a department in the list and click the in the person infoarmation list to pop up the adding person
interface.
2. Input the Person Name (required), Gender, ID Card, etc., upload the photo of the person and click the icon
to finish adding.
Note: The format of the photo should be .jpg, or .jpeg.
To Next Page
Loading...
Need help?
General
