Access Control Terminal·User Manual
69
window.
2. Edit the attendance checking point name, start date, validity, and attendance checking point type, controller name, door
position, and reader name.
3. Click the button to complete the operation.
Adding Attendance Check Point
Check the checkbox of a checking point and click the button to delete the added checking point.
Adjustment Management
Press the Adjustment Management tab to enter the adjustment management interface.
On this interface, Reason Management and List Management can be realized.
Reason Management
Leave
Purpose:
You can add, edit, and delete reasons for leave on the leave interface.
Steps:
1. Press the leave tab to enter the leave interface.
2. Click the button to pop up the adjustment reason adding dialog box.
To Next Page
Loading...
