HIKVISION DS-K1T320 Series User Manual

Status of the device becomes Acve
aer successful acvaon.
5.
Modify IP address of the device.
1) Select the device.
2) Change the device IP address to the same subnet as your computer by either modifying the IP
address manually or checking Enable DHCP.
3) Input the admin password and click Modify to acvate your IP address modicaon.
5.4 Acvate Device via iVMS-4200 Client Soware
For some devices, you are required to create the password to acvate them before they can be
added t
o the iVMS-4200 soware and work properly.
Steps
Note
This funcon should be supported by the device.
1.
En
ter the Device Management page.
2.
Click
on the right of De
vice Management and select Device.
3.
Click Online Device to show the online device area.
The searched online devices are displayed in the list.
4.
Check the device status (shown on Security Level column) and select an inacve device.
5.
Click Acvate
to open the Acvaon dialog.
6.
Create a password in the password eld, and conrm the password.
DS-K1T320 Series Face Recoginon Terminal User Manual
14

HIKVISION DS-K1T320 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T320 Series
Category	Touch terminals
Language	English