EasyManua.ls Logo

HIKVISION DS-K1T320 Series - Network Settings

HIKVISION DS-K1T320 Series
159 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14.6.7 Network Sengs
Set TCP/IP, port, Wi-Fi parameters, ISUP, and plaorm access.
Note
Some device models do not support Wi-Fi or mobile data sengs. Refer to the actual products
when conguraon.
Set Basic Network Parameters
Click Conguraon → Ne
twork → Network Sengs → TCP/IP .
Figure 14-5 TCP/IP Sengs Page
Set the parameters and click Sa
ve to save the sengs.
NIC Type
Select a NIC type from the drop-down list. By default, it is Auto.
DHCP
If uncheck the funcon, you should set the IPv4 address, IPv4 subnet mask, IPv4 default
gateway, Mac address, and MTU.
If you check the funcon, the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4
de
fault gateway automacally.
DNS Server
Set the preferred DNS server and the Alternate DNS server according to your actual need.
DS-K1T320 Series Face
Recoginon Terminal User Manual
85

Table of Contents

Related product manuals