HIKVISION DS-K1T320 Series - Chapter 10 Time Settings

Chapter 10 Time Sengs
Set Time and DST
Click Wizz
ard → Time Sengs .
Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device me should be synchronized manually. You can set the device me
manually or check S
ync. with Computer Time to synchronize the device me with the
computer's me.
Server Address Type/Server Address/NTP Port/Interval
Y
ou can set the server address type, server address, NTP port, and interval.
DST Sengs
Check DST to enable DST sengs.
Set the DST start me, end me and bias me.
Click Ne
xt to complete the sengs.
DS-K1T320 Series Face Recoginon Terminal User Manual
74