HIKVISION DS-K1T320 Series User Manual

Figure 14-4 DST Page
2.
Enable DS
T.
3.
Set the DST start me, end me and bias me.
4.
Click Save to save the sengs.
14.6.5 Change Administrator's Password
Steps
1.
Click Conguraon → User Management .
2.
Click
.
3.
En
ter the old password and create a new password.
4.
Conrm the new password.
5.
Click OK.
Cauon
The password strength of the device can be automacally checked. We highly recommend you
chang
e the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
14.6.6 View Device Arming/Disarming Informaon
View device arming type and arming IP address.
Go t
o Conguraon → Arming/Disarming Informaon .
You can view the device arming/disarming informaon. Click Refresh to refresh the page.
DS-K1T320 Series Face
Recoginon Terminal User Manual
84

HIKVISION DS-K1T320 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T320 Series
Category	Touch terminals
Language	English