HIKVISION DS-K1T320 Series - Platform Access; User Management; Add Administrator

If you choose V5.0, you should create an account and ISUP key. If you choose other version,
you should create an ISUP account only.
Note
●
R
emember the ISUP account and ISUP key. You should enter the account name or the key
when the device should communicate with other plaorms via ISUP protocol.
●
ISUP key range: 8 to 16 characters.
7.2.4 Plaorm Access
You can change the device vericaon code and set the server address before you add the device
t
o the Hik-Connect mobile client.
Before You Start
Make sure your device has connected to a network.
Steps
1.
Select Comm. (Communicaon) on the Home page to enter the Communicaon sengs page.
2.
On the Communicaon sengs page, select Hik-Connect.
3.
Enable Hik-Connect
4.
Enter Server IP.
5.
Create the Vericaon Code, and y
ou need to enter the vericaon code when you manage the
devices via Hik-Connect.
7.3 User Management
On the user management interface, you can add, edit, delete and search the user.
7.3.1 Add Administrator
The administrator can log in the device backend and congure the device parameters.
St
eps
1.
Long tap on the inial page and log in the backend.
2.
Select User → Add User to enter the Add User page.
DS-K1T320 Series Face Recoginon Terminal User Manual
29