HIKVISION DS-K1T320 Series - Set Time; Set DST

14.6.3 Set Time
Set the device's me zone, synchronizaon mode, server address, NTP port, and interval.
Click Conguraon → S
ystem → System Sengs → Time Sengs .
Figure 14-3 Time Sengs
Click Sa
ve to save the sengs aer the conguraon.
Time Zone
Select the de
vice located me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device me should be synchronized manually. You can set the device me
manually or check S
ync. with Computer Time to synchronize the device me with the
computer's me.
Server Address Type/Server Address/NTP Port/Interval
You can set the server address type, server address, NTP port, and interval.
14.6.4 Set DST
Steps
1.
Click Conguraon → S
ystem → System Sengs → Time Sengs .
DS-K1T320 Series Face
Recoginon Terminal User Manual
83