HIKVISION DS-K1T320 Series - Time Settings; Set DST

You can view the device name, device No., language, model, serial No., version, device capacity,
etc.
8.4.2 Time Sengs
Set the me zone, me sync. mode, and displayed me.
Tap Conguraon → System → System Sengs → Time Sengs to enter the sengs page.
Figure 8-3 Time Sengs
Tap Sa
ve to save the sengs.
Time Zone
Select the me zone where the device is located from the drop-down list.
Time S
ync. Mode
Manual
By default, the device me should be synchronized manually. You can set the device me
manually.
NTP
Se
t the NTP server's IP address, port No., and interval.
8.4.3 Set DST
Steps
1.
T
ap Conguraon → System → System Sengs → DST , to enter the sengs page.
DS-K1T320 Series Face
Recoginon Terminal User Manual
53