HIKVISION DS-K1T320 Series - Security Mode Settings; Certificate Management

Set the major and minor type of the log type. Set the start me and end me for searching, and
click Search.
The results will be displayed below, which including the No., me, the major type the minor type,
the channel No., the local/remote user informaon, the remote host IP, etc.
14.6.19 Security Mode Sengs
Set the security mode for logging in the client soware.
On the Device for Management page, click Maintenance and Security → Security → Security
Service .
Select a security mode, and click Save.
Security Mode
High security level for user informaon vericaon when logging in the client soware.
Compable Mode
The user informaon vericaon is compable with the old client soware version when
logging in.
14.6.20 Cercate Management
It helps to manage the server/client cercates and CA cercate.
Note
The
funcon is only supported by certain device models.
Create and Install Self-signed Cercate
Steps
1.
Go t
o Maintenance and Security → Security → Cercate Management .
2.
In the Cercate Files ar
ea, select a Cercate Type from the drop-down list.
3.
Click Create.
4.
Input cercate informaon.
5.
Click OK t
o save and install the cercate.
The created cercate is displayed in the Cercate Details area.
The cercate will be saved automacally.
6.
Download the cercate and save it to an asking le in the local computer.
7.
Send the asking le to a cercaon authority for signature.
8.
Import the signed cercate.
1) Select a cercate type in the Import P
asswords area, and select a cercate from the local,
and click Install.
DS-K1T320 Series Face
Recoginon Terminal User Manual
102