Before You Start
Acvate the device and select an applicaon mode.
Steps
1.
Oponal: T
ap Skip to skip adding administrator if required.
2.
Enter the administrator's name (oponal) and tap Ne
xt.
Figure 6-6 Add Administrator Page
3.
Select a
credenal to add.
Note
Up to one credenal should be added.
-
: Face forward at the camera. Make sure the face is in the face recognion area. Click to
c
apture and click
to
conrm.
-
: Press your nger according to the instrucons on the device screen. Click to conrm.
-
: Enter the card No. or present card on the card
presenng area. Click OK.
4.
Click OK.
You will enter the authencaon page.
St
atus Icon Descripon
/
Device is armed/not armed.
DS-K1T320 Series Face Recoginon Terminal User Manual
22