HIKVISION DS-K1T320 Series - Page 63

Note
The page may vary according to dierent device models. Refers to the actual page for details.
Capacity
Y
ou can view the number of user, face picture, card, and event.
Note
Parts of the device models support displaying the ngerprint number. Refers to the actual page
f
or details.
Device Upgrade
Plug the USB
ash drive in the device USB interface. Select Upgrade → OK , and the device will
read the digicap.dav le in the USB ash drive to start upgrading.
Restore to Factory Sengs
All parameters will be restored to the factory sengs. The system will reboot to take eect.
Restore to Default Sengs
All parameters, except for the communicaon sengs, remotely imported user informaon, will
be restored to the default sengs. The system will reboot to take eect.
Reboot
The de
vice will reboot aer the conrmaon.
Select , long pr
ess OK, and enter admin password to view device version informaon.
DS-K1T320 Series Face
Recoginon Terminal User Manual
48