HIKVISION iDS-7700NXI-I4/16P/16S Series - Page 130

Used to determine if the target is a real object thrown from building. The lower the value, the
easier it is for a detected object in the video to be determined as an object thrown from
building, and the greater the likelihood of a false alarm. Default value of 50 is recommended.
Note
Default value is recommended at rst. Adjustment can be made if false alarm is triggered
frequently during the operaon. Target condence is recommended to be adjusted inially, and
detecon condence is recommended to be adjusted later if no sound detecon results
provided. If
sll, there is no obvious eect, then adjust the sensivity.
8. Click Save.
9. Click Arming Schedule. Refer to Congure Arming Schedule .
10. Click Linkage Method. Refer to
Congure Linkage Acons .
11. Congure Shield Region.
Note
Figure 7-17 Shield Region
1)Click Shield Region.
2)Draw the region.
Network Video Recorder User Manual
109