HIKVISION iDS-7700NXI-I4/16P/16S Series - Add Network Camera Via Customized Protocol

Figure 1-13 Edit Network Camera
3. Select Adding Method as Manual.
Plug-and-Play
The camera is physically connected to the PoE interface. Its parameters cannot be edited. You
can go to System → Network → TCP/IP to change IP address of PoE port.
Manual
Add IP camera without physical
connecon via network.
4. Enter IP address, User Name, and Password.
5. Click OK.
1.4.4 Add Network Camera via Customized Protocol
For network cameras that are not using standard protocols, you can congure customized
protocols to add them. The system provides 8 customized protocols.
Steps
1. Click
on the main menu.
2. Go to More Sengs → Protocol .
Network Video Recorder User Manual
12