HIKVISION iDS-7700NXI-I4/16P/16S Series - Chapter 6 Event; Normal Event Alarm; Configure Motion Detection Alarms; Configure Video Loss Alarms

Chapter 6 Event
6.1 Normal Event Alarm
6.1.1 Congure Moon Detecon Alarms
Moon detecon enables the device to detect the moving objects in the monitored area and
trigger alarms.
Steps
1. Go to System → Event → Normal Event →
Moon Detecon .
2. Select a camera.
3. Check Enable.
4. Set the
moon detecon rule.
For cameras have human
and vehicle
detecon
funcon.
Click Draw Area to draw the detecon area(s) on the preview
screen.
Set Detecon Target as Human or Vehicle to discard alarms
which are not triggered by human body or vehicle.
For cameras do not have
human and vehicle
detecon funcon.
Click Full screen to set the full-screen as the detecon area, or
drag on the preview screen to draw the customized detecon
area.
5. Set Sensivity
Sensivity
Sensivity ranges from 0 to 100. It allows you to calibrate how readily movement triggers the
alarm. A higher value results in the more readily to triggers
moon detecon.
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set linkage
acons. Refer to Congure Linkage Acons .
6.1.2
Congure Video Loss Alarms
Video loss detecon detects video loss of a channel and takes alarm response acon(s).
Steps
1. Go to System → Event → Normal Event → Video Loss .
2. Select a camera.
3. Check Enable.
4. Set the arming schedule. Refer to
Congure Arming Schedule .
5. Set linkage acons. Refer to Congure Linkage Acons .
Network Video Recorder User Manual
59