HIKVISION iDS-7700NXI-I4/16P/16S Series - Add an Alarm Device

Note
All IoT channels can be enabled/disabled with shortcuts.
a. Go to Maintenance → System Service → More Sengs .
b. Click Time Sync Conguraon, select Enable IoT Time Sync or Disable IoT Time Sync to
enable/disable scheduled
me sync for all IoT channels.
Figure 8-2 IoT Time Sync
This funcon is only available for the admin user.
5. Click Add.
8.1.2 Add an Alarm Device
Add alarm devices of various manufacturers to receive alarms. You can congure linkage acons
like triggering recording and full screen monitoring, when an alarm occurs.
Before You Start
Install alarm devices. Ensure network communicaon between alarm devices and video recorder is
well.
Steps
1. Go to Business Applicaon → IoT → Alarm → Device Management .
2. Click Add.
Network Video Recorder User Manual
114