HIKVISION iDS-7700NXI-I4/16P/16S Series - Page 164

Figure 12-4 SNMP Sengs
2. Check Enable. A message will pop up to nofy about a possible security risk. Click Yes to
connue.
3. Congure the SNMP sengs as needed.
Trap Address
SNMP host IP address.
Trap Port
Port of the SNMP host.
4. Click Apply.
Note
You can congure SNMP v2 and SNMP v3 parameters via web browser in Conguraon →
System → Advanced Sengs → SNMP .
Network Video Recorder User Manual
143