HIKVISION iDS-TCV507-BIR/1550

Video
Analysis
Interface
Click Set to set the video analysis area.
Figure 1-14 Set Video Analysis Area
a. Select the area.
b. Set the parameters.
-
Guiding
Direcon of Trac Light: The direcon guided by the trac light.
-
Trac Light Color: The color of the trac light.
-
Trac Light Amount: The number of the trac light(s).
-
Trac Light Layout: The arrangement of the trac light(s).
c. Click Zoom In to zoom in the live view image.
d. Click Add Trac Light to add the trac light.
e. Drag the four points of the region to adjust the size or drag the whole region
to adjust its
posion according to the actual scene.
f. Click Delete Current
Trac Light to delete the area.
g. Click OK.
You can click Detect to test the
trac light.
Network
Mode
Set Linked Red Light Channel and Yellow Light Related Channel No. according to
the actual wiring.
Note
You can go to Live View → Trac Light Status to view the trac light status.
4.
Click Save.
Network Trac Camera Conguraon Manual
32