HIKVISION iDS-TCV507-BIR/1550

1.6 Set Capture Schedule
You can set the schedule for the violaon behavior capture or checkpoint capture if needed.
Steps
Note
The funcon varies with dierent models. The actual device prevails.
1.
Go to Conguraon → Capture → Capture Parameters → Capture Schedule .
2.
Oponal: Check Violaon Priority.
You can set the priority level of each violaon type.
Note
●
The funcon is only valid when Trigger Mode is Mixed-Trac Lane or Video Analysis E-Police.
●
0 represents no priority requirement.
3.
Click to set the capture schedule according to the actual needs.
Figure 1-15 Set Capture Schedule
4.
Select Lane.
5.
Oponal: Check No Plate Vehicle Capture according to the actual needs.
6.
Adjust the me period.
Network Trac Camera Conguraon Manual
33