Shuer
If the shuer speed is quick, the details of the moving objects can be displayed beer. If the
shuer speed is slow, the outline of the moving objects will be fuzzy and trailing will appear.
Gain
It refers to the upper limit value of liming image signal amplicaon. It is recommended to
set a high gain if the illuminaon is not enough, and set a low gain if the illuminaon is
enough.
Dayme Brightness Enhancement
It refers to the brightness of the image in the dayme. Higher value stands for brighter image.
Window Enhancement
In front light or back light scene, the ash light may not pass through the vehicle window, or
the image eect of the window is bad caused by the light. In this condion, you can check
Window Enhancement. The higher the Brightness Enhancement Level is, the brighter the
window image is. The higher the Defog Level is, the
beer the permeability of the window
image is.
White Balance Level
It is the white rendion funcon of the device used to adjust the color temperature according
to the environment.
Contrast Enhancement
Check Contrast Enhancement to capture clearer images. Select Contrast Enhancement
Mode, and set corresponding parameters.
Contrast Enhancement Mode
Descripon
On The contrast enhancement mode is always enabled.
Time The contrast enhancement mode is enabled during the set
start me and end me. In other me, it is disabled.
Brightness The contrast enhancement mode is enabled according to the
brightness of the surroundings. In this case, you can set
Brightness Level.
Contrast Enhancement Level
The higher the level is, the more the contrast is enhanced.
Halo Suppression Level
Halo suppression is to suppress the halo of the vehicle headlights. The higher the level is,
the more the halo is suppressed.
Network Trac Camera Conguraon Manual
35
To Next Page
Loading...
Need help?
General
