HIKVISION iDS-TCV507-BIR/1550 User Manual

Steps
Note
●
For video intersecon violaon system mode, only strobe light can be connected, and the I/O
eecve status should be set as pulse.
●
The supported parameters vary with dierent models. The actual device prevails.
1.
Go to Conguraon → Capture → Capture Parameters → Supplement Light Parameters .
Figure 1-18 Set Supplement Light Parameters
2.
Select the I/O and set the supplement light parameters.
I/O Output Mode
Supplement Light Mode
The
ash light will be triggered by the signals and output high intensity illuminaon
instantaneously. The light can pass through the windshield and help to capture the details.
Constant Light Mode
The constant light supplements light for the scene.
Output in Advance
It is the preact me [0 to 1000 μs] of the ash light, to ensure that the ash light is on when
capture is triggered.
Output Dwell Time
Network Trac Camera Conguraon Manual
37

HIKVISION iDS-TCV507-BIR/1550 Specifications

General

Brand	HIKVISION
Model	iDS-TCV507-BIR/1550
Category	Security Camera
Language	English