Chapter 4
Removal, Replacement, and
Adjustment Procedures
Tool and Supply Requirements
To service the VersaCare™ Bed, the following tools and supplies are required:
• Ratchet
• Extension, 6"
•7 mm wrench
• 13 mm wrench
• 13 mm socket
• 17 mm wrench
• T25 Torx®
1
screwdriver
• T20 Torx® screwdriver
• T15 Torx® screwdriver
• T10 Torx® screwdriver
• Small screwdriver
• #2 phillips head screwdriver
• Rubber mallet
• E-ring installation tool
• (2) Jack stands
• Scissor jack
• 3/32" punch
• Rivet gun with plastic rivets
• Pot of white petroleum jelly (approx. 400 g)
• 130016 Safety jack (2 each)
1. Torx® is a registered trademark of Textron, Inc.
4
VersaCare™ Bed Service Manual (MAN333 REV 2) Page 4 - 1
To Next Page
Loading...
Need help?
General
