Hill-Rom VersaCare P3201 User Manual

Chapter 2
Troubleshooting Procedures
2
Getting Started
WARNING:
Only facility-authorized personnel should service the VersaCare™ Bed.
Servicing by unauthorized personnel could result in personal injury or
equipment damage.
Begin each procedure in this chapter with step 1. Follow the sequence outlined
(each step assumes the previous step has been completed). In each step, the
normal operation of the product can be confirmed by answering Yes or No to
the statement. Your response will lead to another step in the procedure, a repair
analysis procedure (RAP), or a component replacement. If more than one
component is listed, replace them in the given order.
To begin gathering information about the problem, start with Initial Actions.
To isolate or identify a problem and to verify the repair after completing each
corrective action (replacing or adjusting a part, seating a connector, etc.),
perform the Function Checks.
To verify the repair, perform the Final Actions after the Function Checks.
If troubleshooting procedures do not isolate the problem, call Hill-Rom
Technical Support at (800) 445-3720 for assistance.
VersaCare™ Bed Service Manual (MAN333 REV 2) Page 2 - 1

Hill-Rom VersaCare P3201 Specifications

General

Brand	Hill-Rom
Model	VersaCare P3201
Category	Medical Equipment
Language	English