Preventive Maintenance
Chapter 6: General Procedures
Preventive Maintenance Schedule
The following preventive maintenance schedule is a reminder designed to
guide the technician through a normal preventive maintenance procedure on
the VersaCare™ Bed. Examine each element of the schedule and carry out all
the necessary adjustments during the preventive maintenance procedure.
The preventive maintenance schedule is intended to be used in conjunction
with the preventive maintenance checklist following it. This checklist is
designed to keep a running history of maintenance and subsequent repair costs
for the VersaCare™ Bed. Keeping close records and maintaining the
VersaCare™ Bed are two good ways to reduce downtime and at the same time,
keep the nursing staff happy and efficient.
Table 6-1. Preventive Maintenance Schedule
Function Procedure
Overall condition,
frame and welded
assemblies
Examine the overall aspect of the bed.
Examine that the structure and welded assemblies are in good
working condition and that there are no impacts or corrosion.
Do any necessary repairs or paint retouches, replace if necessary.
Observe the symmetry of the bed and examine that the bed frame and
base are not twisted. Do any necessary repairs or paint retouches.
Examine that all labels are installed and can be read; replace them if
necessary.
Headboard and
footboard
Examine the appearance, attachment, and safety of the headboard
and footboard. Replace if necessary.
AC power cord Examine that there are no cuts, scrapes or breaks in the AC power
cord or connector. Replace the AC power cable if necessary.
6
VersaCare™ Bed Service Manual (MAN333 REV 2) Page 6 - 5
To Next Page
Loading...
Need help?
General
