HiLook DVR-E00G-B Series - Page 73

2. Congure the event detecon and select the cameras to trigger the recording when event
occurs.
3. Go to Conguraon → Record → Parameter .
4. Set the
connuous main stream/sub-stream recording parameters for the camera.
5. Go to
Conguraon → Record → Schedule .
6. Select recording type as Event.
Edit Schedule
Steps
1. Go to Conguraon → Record → Schedule .
Figure 6-23 Recording Schedule
Connuous
Connuous recording.
Event
Recording triggered by all event triggered alarms.
2. Select a camera in Camera No.
3. Turn on Enable.
4.
Congure the recording schedule.
1) Click Edit.
2) Select a day to congure in Weekday.
3) To set an all-day recording schedule, check All Day and select schedule Type.
4) To set other schedules, uncheck All Day and set Start/End
me and schedule Type.
Note
Up to 8 periods can be congured for each day. And the me periods cannot be overlapped
with each other.
5) Click OK to save the sengs and go back to upper level menu.
Digital Video Recorder User Manual
60