Hioki 3522-50 - Details of the Setting Process

115
────────────────────────────────────────────────────
4.21 Continuous Test Function
────────────────────────────────────────────────────
4.21.2 Details of the Setting Process
S
aves conditions for
n
ormal test.
Test conditions for some other test sample are already saved here
Saves condition
f
or comparator
test.
Panel Save Screen
Initial screen
Menu screen
Application menu
screen
This section describes procedure when performing continuous testing with
panel numbers 6, 8, and 10 for example.
1. Save the continuous testing conditions using the panel save function to the
panel numbers 6, 8, and 10. The continuous testing is performed for the first
and third parameters which have been saved.
For details on panel save function, see Section 4.16.
2. Press the key on the Initial screen to display the Menu screen.
3. Press the key on the Menu screen to display the Application menu
screen.
4. Press the key on the Application menu screen to display the
Continuous test screen.