65
────────────────────────────────────────────────────
4.8 Short Circuit Compensation
────────────────────────────────────────────────────
4.8.4 Spot Compensation
Short circuit
compensation
screen
Short Circuit Com
ensation Screen
Units keys (shown in non-reversed video, until a numerical
value for the frequency has been input)
Numeric
keypad
Previous
frequency
Sets frequency
to DC.
1. To select SPOT compensation, press this key with the Short circuit
compensation screen displayed.
2. A numeric keypad is displayed for input of the frequency. Until one of
these keys is pressed for input of a numerical value, the previous frequency
for which SPOT compensation was performed is displayed.
SPOT compensation for the same frequency as previously:
Just press the key. SPOT compensation will be started using the same
frequency which was used for the last episode of SPOT compensation.
To Next Page
Loading...
