Hioki 3522-50 - Spot Compensation

56
────────────────────────────────────────────────────
4.7 Open Circuit Compensation
────────────────────────────────────────────────────
4.7.4 Spot Compensation
Open circuit
compensation
screen
O
p
en Circuit Com
p
ensation Screen
Units keys (shown in non-reversed video, until a numerical value
for the frequency has been input)
Numeric
keypad
Previous
frequency
1. To select SPOT compensation, press this key with the Open circuit
compensation screen displayed.
2. A numeric keypad is displayed for input of the frequency. Until one of
these keys is pressed for input of a numerical value, the previous frequency
for which SPOT compensation was performed is displayed.