123
────────────────────────────────────────────────────
4.24 Setting for Display
────────────────────────────────────────────────────
4.24.2 Details of the Setting Process
Initial screen
Application menu
screen
Menu screen
LCD display setting
Voltage and Current
Monitor setting
1. Press the key on the Initial screen to display the Menu screen.
2. Press the key on the Menu screen to display the Application menu
screen.
3. Press the key on the Application menu screen to display the Display
Setting Screen.
Setting for LCD Display
:The LCD display and backlight remain on permanently.
:The LCD display and backlight remain off permanently.
When OFF is selected, the LCD display and backlight go out approximately
10 seconds after the touch panel is last touched. When the touch panel is
touched after the display and backlight have gone out, they will come on
again. When the display and backlight are off, the measurement time is
reduced, as Vmoni and Imoni do not display indications.
Setting for Voltage and Current Monitors (Vmoni, Imoni)
:The voltage and current monitors display indications.
:The voltage and current monitors do not display indications.
When OFF is selected, the measurement time is reduced, as Vmoni and
Imoni do not display indications. For the measurement time, refer to "7.3
Time Taken for Testing."
4. To exit from this mode, press the key to return the Initial screen.
To Next Page
Loading...
