36
────────────────────────────────────────────────────
4.3 Setting the Test Fre quency
────────────────────────────────────────────────────
4.3.2 Selecting the Input Method
Changes to the Ten key screen
Ten Key Screen
Digit Screen
Changes to the Digit screen
1. On the Initial screen, press the key, and the Menu screen will be
displayed.
2. Press the key on the Menu screen, and the display will change over to
the one of the Frequency setting screens which was previously used.
3. The display can be switched over between these two Frequency setting
screens just by pressing the soft keys shown in the figure.
To Next Page
Loading...
