Hioki 3522-50 - External DC Bias Setting; Control Screen Sequence

118
────────────────────────────────────────────────────
4.22 External DC Bias Setting
────────────────────────────────────────────────────
4.22.1 Control Screen Sequence
External DC bias function
on/off
Initial screen screen
External DC bias setting
Initial screen
Menu screen
Application menu screen
4.22 External DC Bias Setting
The external DC bias function is available for test of supplying DC bias or
batteries and if the test result is "OVER FLOW" or failed. Set this function
to ON.
For supplying external DC bias, refer to Section 5.7, "Supplying DC Bias".
When using the 9268, 9268-01, or 9269 DC-bias units, turn off the DC-bias
function.
Press the key.
Press the key.
Press the key.
Set the external DC bias function to on or off.
When the setting is completed, press the key
to return to the Initial screen.