163
────────────────────────────────────────────────────
6.5 Disposing of the Unit
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
WARNING
To avoid electrocution, turn off the power switch and disconnect the
power cord and measurement cables before removing the lithium
battery.
When disposing of this product, remove the lithium battery and
dispose of battery and product in accordance with local regulations
If the protective functions of the product are damaged, either
remove it from service or mark it clearly so that others do not use it
inadvertently.
6.5 Disposing of the Unit
A lithium battery is used in the 3522-50 as a power source for recording test
conditions.
Tools required for dismantling
Phillips screwdriver 1
Pair of tweezers 1
How to dismantle the unit
1. Turn off the power switch, and disconnect
the power cord and other cables.
2. Remove the eight screws at the back of the
unit and the two screws which hold on the
carrying handle, as shown.
To Next Page
Loading...
