9
────────────────────────────────────────────────────
2.2 Connecting the Test Leads
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
NOTE
Test fixture
The connections to the article to be tested are as shown in the following
figure.
No test cables are included with the 3522-50 unit. They must be purchased
separately. (For details, refer to Section 7.4, "Options")
If all four terminals are left floating, the numbers which appear on the
display are completely meaningless.
To Next Page
Loading...
