4.11 Setting the Trigger Delay 74
4.11.1 Control Screen Sequence 74
4.11.2 Details of the Setting Process 75
4.12 Setting Averaging 77
4.12.1 Control Screen Sequence 77
4.12.2 Details of the Setting Process 78
4.13 Setting the Testing Speed 80
4.13.1 Control Screen Sequence 80
4.13.2 Details of the Setting Process 81
4.14 Setting and Activating the Comparator 82
4.14.1 Control Screen Sequence 83
4.14.2 Setting the Comparator 83
4.14.3 Returning from Comparator Operation to Normal
Testing 86
4.14.4 Choosing How to Set the Upper and Lower Limit
Values 86
4.14.5 Setting the Upper or Lower Limit Value as
an Absolute Value (ABS) 88
4.14.6 Setting the Upper or Lower Limit Value as
a Percentage (%) Relative to a Standard Value 90
4.14.7 Displaying Measurement Values as Deviations from
the Reference value (Δ%) 93
4.15 Setting and Activating the Scaling 95
4.15.1 Control Screen Sequence 95
4.15.2 Setting Scaling 96
4.15.3 Canceling the Scaling Function 97
4.15.4 Setting the Compensation Coefficient (a, b) 98
4.16 Panel Save Function 100
4.16.1 Control Screen Sequence 100
4.16.2 Details of the Setting Process 101
4.17 Panel Load Function 104
4.17.1 Control Screen Sequence 104
4.17.2 Details of the Setting Process 105
4.18 Setting the Beep Sound 107
4.18.1 Control Screen Sequence 107
4.18.2 Details of the Setting Process 108
4.19 Enlarged Display of Measurement Values 109
4.19.1 Control Screen Sequence 109
4.19.2 Details of the Setting Process 110
4.20 System Reset 111
4.20.1 Control Screen Sequence 111
4.20.2 Details of the Setting Process 112
To Next Page
Loading...
