Hioki BT3554 - Operating Precautions; Handling Test Leads and Zero Board

16
Operating Precautions
Handling the test leads
CAUTION
Do not apply force when the pin type lead tip is in contact
with the battery at a tilted angle.
OK NO
Avoid subjecting the temperature probe tip to physical
shock, and avoid sharp bends in the leads. These may
damage the probe or break a wire.
IMPORTANT
When using the instrument, use only the test leads with those
VSHFL¿HGE\RXUFRPSDQ\8VLQJRWKHUWHVWOHDGVPD\UHVXOW
in incorrect measurements due to loose connections or other
reasons.
Zero adjustment board
WARNING
To prevent short-circuit accidents, do not place the
zero adjustment board on top of the battery.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com