Hioki CM3286 - Installing the Application Software GENNECT Cross

58
Bluetooth
®
Communications (only for CM3286-01)
Installing the application software GENNECT Cross
Search for “GENNECT Cross” on the App Store from your iPhone, iPad or other Apple device, or on Google
Play from your Android device. Then download and install the GENNECT Cross. You will need an Apple ID to
download the app from the App Store, or a Google account to download the app from Google Play. For more
information about how to register an account, contact the store at which you purchased your device.
• Because the CM3286-01 emit radio waves, use in a country or region where they have not been
approved may be subject to nes or other penalties as a violation of applicable laws or regulations. For
more information, see the attached “Precautions Concerning Use of Equipment That Emits Radio Waves”
or go to our website.
• The CM3286-01 availability is limited to certain countries. For more information, contact your authorized
Hioki distributor or reseller.
• Bluetooth
®
communications range varies greatly with distance from obstructions (walls, metal obstruction,
etc.) as well as distance from the oor or ground. To ensure stable measurement, verify adequate signal
strength.
• Although this application software is provided free of charge, downloading or use of the application
software may incur Internet connection charges. Such charges are the sole responsibility of the user.
• This application software is not guaranteed to operate on all mobile devices.