46
Single-phase Energy Meter Comparison Function [Setting Wh]
Setting the desired meter constant
Set after conducting the procedures 1 and 2 of "Single-phase Energy Meter Comparison Function [Setting
Wh]" (p. 42)
1
Select the portion you wish to change.
The selected portion will ash.
2
Change the value.
or
Set the value shown on the meter.
The set value will be stored.
• Press the SHIFT key to go back to the measurement
display.
• The changed nal value will be the setting value.
• "Watt-hour meter constants default setting value" (p. 47)
To Next Page
Loading...
