Hioki CM3286 - Hold Functions

48
Manual Hold / Auto Hold
Manual Hold / Auto Hold
MANUAL HOLD AUTO HOLD
Measured value is retained.
(
appears)
>
(Measured value
stabilizes.)
Measured value is
automatically retains.
(
appears)
To measurement
object
To measurement object
Pressing the HOLD key again cancels
the measured value hold function.
(
and disappears)
→ ashes.
Pressing the HOLD key for 1 second cancels the auto hold
function. (
and disappears)
See the next page for auto hold conditions.
Press for 1 sec.
Disconnect