Hioki CM3286 - Page 78

72
Specications
Display update interval 2 times/sec.
Response time 1 sec.
Crest factor 3 or less for current 6 A and 60 A range
1.6 or less for current 600 A range and voltage 600 V range
Zero-display range • Voltage and current RMS values: 29 counts or less
• If they fall within the zero-display range
,
current (voltage) peak values and
active/apparent/reactive power values are shown as zero
,
while current
(voltage) frequency
,
power factor
,
and zero-cross phase values are shown as
“– – – –.”
• A value of 0 is used in single-phase active energy calculations.
Frequency derating
characteristics
0
100
200
300
400
500
600
700
10 100 1000 10000
Frequency [Hz]
Maximum input current [A]