Hirschmann GREYHOUND GMM42 User Manual

38
Installation GREYHOUND Switch
Release 01 04/2016
1.9.3 SD card interface
Prerequisite:
Only use Hirschmann SD cards.
See “Accessories” on page 71.
The SD card interface allows you to connect the AutoConfiguration Adapter
ACA31 storage medium. This is used for saving/loading the configuration
data and diagnostic information, and for loading the software.
On the front of the device there is an LED display that informs you about the
status of the interface.
GRS1142
GRS1042

Hirschmann GREYHOUND GMM42 Specifications

General

Brand	Hirschmann
Model	GREYHOUND GMM42
Category	Switch
Language	English