Installation GREYHOUND Switch
Release
01
04/2016
73
Underlying technical standards
The devi
ce generally fulfills the technical standards named in their current
versions.
The device has an approval based on a specific standard only if the
approval indicator appears on the device casing.
Name
ATEX
(2014/34/EU)
ATEX – Intended use of equipment and protection systems in
potentially explosive areas.
RCM Australian Regulatory Compliance Mark (RCM)
Australian Radiocommunications Standard 2008,
Radiocommunications Act 1992
FCC 47 CFR Part 15 Code of Federal Regulations
Germanischer Lloyd Rules for Classification and Construction VI-7-2 – GL
ISA 12.12.01,
CSA C22.2 No. 213
Nonincendive Electrical Equipment for Use in Class I, Division 2
Hazardous Locations
IEC 60825-1 Laser product safety
IEC 60945 Navigation and wireless communication devices and systems for
maritime transport - General requirements - Test procedure and
required test results.
IEC/EN 61850-3 Communication networks and systems in substations – Part 3:
General requirements
IEEE 1613 IEEE Standard Environmental and Testing Requirements for
Communication Networking Devices in Electric Power Substations
IEEE 802.3 Ethernet
EN 50121-4 Railway applications – EMC – Emission and immunity of the signaling
and telecommunications apparatus (Rail Trackside)
EN 50155 Railway applications - Electronic equipment used on rolling stock
EN 55022 Information technology equipment – Radio disturbance characteristics
– Limits and methods of measurement
EN 60950-1 Information technology equipment – Safety – Part 1: General
requirements
EN 61000-3-2 Electromagnetic compatibility (EMC) – part 3-2: Threshold values –
threshold values for harmonic currents (device input current <= 16 A
per connection line)
EN 61000-3-3 Electromagnetic compatibility (EMC) – part 3-3: Threshold values –
limitation of voltage changes, voltage fluctuations and flickering in
public low voltage supply networks for devices with a rated current <=
16 A per wire that are not subject to any special connection condition
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part 6-2: Generic standards –
Immunity for industrial environments
EN 61000-6-4 Electromagnetic compatibility (EMC) – Part 6-4: Generic standards –
Emission standard for industrial environments
EN 61131-2 Programmable controllers – Part 2: Equipment requirements and tests
NEMA TS 2 Traffic Controller Assemblies with NTCIP Requirements
(environmental requirements)
UL/IEC 61010-1,
UL/IEC 61010-2-201
Safety for Control Equipment
Table 10: List of the technical standards
To Next Page
Loading...
Need help?
General
