18
Installation RSP 20/25/30/35
Release
08
08/2014
1.4.2 Rear view
1.5 Power supply
You will find information on the characteristic values here:
“Device name and product code” on page 13
1.5.1 Working voltage characteristic value K9
For the power supply of the device, a 3-pin terminal block is available.
For further information see “Working voltage characteristic value K9” on
page 29.
1.5.2 Working voltage with the characteristic value KK
For the redundant power supply of the device, two 3-pin terminal blocks are
available.
For further information see “Working voltage with the characteristic value KK”
on page 30.
1 Slot for the SD card
2 Knurled screw
To Next Page
Loading...
